User Manual v12.3.0 Owner manual

Brocade Network Advisor SAN + IP User Manual 2201
53-1003155-01
IP device properties
E
System OID The system’s object identifier.
Product Type The fabric’s product type, which is a Layer 2 switch.
Serial # The VCS fabric member’s serial number.
VCS Mode The VCS mode of the switch, which can be standalone or VCS fabric.
VCS ID The VCS ID configured in the fabric.
Config Mode The configuration mode of the fabric, which is Local Only or Distributed.
Licensed Features The licensed features available on the device.
RBridge ID The routing bridge identifier associated with the VCS fabric member.
Access Gateway Mode Indicates whether the Access Gateway mode is enabled or disabled.
State The device’s state (online or offline).
Fabric Status The state of the fabric that is least operational, based on ISL status.
The possible states are: operational, unknown, degraded or failed.
Status The health status of the switch.
Admin Status The administrative status of the switch, for example, Normal.
Memo Additional comments regarding the switch.
Vendor The switch vendor.
Model The switch model type (VDX 6710, VDX 6720, or VDX 6730).
Port Count The number of ports on the switch.
Firmware The firmware version and build number.
Location The physical location of the product.
Contact The name of the person or group you should contact about the product,
for example, Technical Support.
Description The description of the product.
Connected AP Count The number of AP devices connected to the device.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 2211.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 2212.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 2212.
Port Profiles tab Select to display information about port profiles on the fabric.
Name The name of the port profile (not editable). There are multiple default
profiles in a fabric (one per member).
Status Port profile states can be one of the following, all of which are configured
using the command line interface:
• Created
• Activated
• Associated
• Applied
MAC Count The number of MAC addresses associated with the port profile.
TABLE 233 VCS fabric properties (Continued)
Field/Component Description