User Manual v12.3.0 Owner manual

162 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Server Data restore
5
1. Select Server > Options.
The Options dialog box displays.
2. Select Server Backup in the Category list.
3. Click Backup Now.
Click Yes on the confirmation message. The backup process begins immediately.
4. Click Apply or OK.
Reviewing backup events
The Master Log, which displays in the lower left area of the main window, lists the events that occur
on the Fabric.
If you do not see the Master Log, select View > Show Panels > All Panels.
The following backup events appear in the Master Log:
• Backup started
• Backup error
• Backup Enabled
• Backup Disabled
• Backup Now
• Backup destination change
• Backup interval change
• Backup start time change
• Domain workgroup change
• User name change
• User password change
• Number of files backed up on completion
• Network share access problem when backup starts or during backup (not when the backup
configuration is changed)
Server Data restore
NOTE
You cannot restore data from a previous version of the Management application.
NOTE
You cannot restore data from a higher or lower configuration (Trial or Licensed version) of the
Management application.
NOTE
You cannot restore data from a different package of the Management application.