User Manual v12.3.0 Owner manual

410 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Performance monitors
8
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Discards/sec — The number (error rate) of receive discard errors per second for the
duration specified in the monitor.
• RX Discards — The number (error count) of receive discard errors.
• TX Discards/sec — The number (error rate) of transmit discard errors for the duration specified
in the monitor.
• TX Discards — The number (error count) of transmit discard errors.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 431.
Accessing additional data from the Top Port Discards monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 2101.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 1601.