User Manual v12.3.0 Owner manual

654 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
Configuration file management
14
TABLE 64 Step 2. Configuration Type
Field/Component Description
AD/LDAP Server option Select to replicate the Active Directory/Lightweight Directory Access
Protocol (AD/LDAP) Server security policy. If both the source and
destination devices are running Fabric OS 7.1 or later, also replicates the
LDAP Role mapping configuration.
DCC Policy option Select to replicate the Device Connection Control (DCC) security policy.
IP Policy option Select to replicate the Internet Protocol (IP) Filter security policy.
RADIUS Server option Select to replicate the Remote Authentication Dial-In User Service
(RADIUS) Server security policy.
SCC Policy option Select to replicate the Switch Connections Control (SCC) security policy.
TABLE 65 Step 3. Select Source Switch
Field/Component Description
Available Switches table Lists the devices from which you can select to replicate a security policy
Fabric Name The name of the fabric that is associated with the selected available
switch.
Switch Name The name of the source switch to be replicated.
Switch IP Address The IP address of the source switch to be replicated.
Switch WWN The world wide name of the source switch to be replicated.
Name The name of the selected switch.
Device Type The type of device port.
Tag The tag number of the port
Serial # The serial number of the switch.
WWN The switch port’s world wide name.
IP Address The switch port’s IP address.
Domain ID The switch port’s top-level addressing hierarchy of the domain.
Vendor The hardware vendor’s name.
Model The name and model number of the hardware.
Port Count The total number of ports.
Firmware The firmware version.
Location The customer site location.
Contact The primary contact at the customer site.
Description A description of the customer site.
State The port state, for example, online or offline.
Status The operational status of the port.; for example, unknown or marginal.