User Manual v12.3.0 Owner manual

810 Brocade Network Advisor SAN + IP User Manual
53-1003155-01
DCB configuration
20
Editing a DCB switch
1. Select Configure > DCB.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select the DCB switch from the Products/Ports list.
3. Click Edit.
The Edit Switch dialog box displays (Figure 316).
FIGURE 316 Edit Switch dialog box
4. Configure the policies for the Edit Switch dialog box tabs, which are described in the following
sections:
• “QoS configuration” on page 816
• “FCoE provisioning” on page 823
• “VLAN classifier configuration” on page 825
• “LLDP-DCBX configuration” on page 829
• “802.1x authentication” on page 832
5. When you have finished configuring the policies, apply the settings to the switch.
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog box.
6. Click OK.
The Deploy to Products dialog box displays.
7. Cl ick OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.