User Manual v12.3.0 User Manual

1208 Brocade Network Advisor SAN User Manual
53-1003154-01
Predefined flow definition templates
29
Predefined flow definition templates for initiator group
and storage array
The predefined flow templates only display when you select a Flow Vision-capable initiator, or
initiator group, or storage, or storage array.
1. Right-click an initiator, or initiator group, or storage, or storage array from the Connectivity Map
or Product List and select Flow > Static Flow or Aggregated Flow or Frame Type Monitoring or
LUN Monitoring.
2. Select the predefined flow template you want from the list, as shown in Figure 519.
FIGURE 519 List of preconfigured flow templates for initiator/initiator group, storage/storage array
The Add Flow - predefined_flow dialog box displays, as shown in Figure 517 (where
predefined_flow is the predefined monitor type).
• Static Flow — Use this Add Flow Definition-Static Flow dialog box to define bidirectiornal
Monitor flow between a source and a destination device. Refer to “Configuring Static Flow
template” on page 1209" for more information.
• Aggregated Flow — Use this Add Flow Definition-Aggregated Flow dialog box to define
bidirectional Monitor flow for a storage port. Refer to “Configuring Aggregated Flow
template” on page 1211" for more information.
• Frame Type Monitoring — Use this Add Flow Definition-Frame Type Monitoring dialog box to
define unidirectional Monitor flow between a source and a destination device including a
frame type from the list. Refer to “Configuring Frame Type Monitoring template” on
page 1212" for more information.
• LUN Monitoring — Use this Add Flow Definition-LUN Monitoring dialog box to define
unidirectional Monitor flow between a source and a destination device with the LUN
details. Refer to “Configuring LUN Monitoring predefined template” on page 1213" for
more information.