User Manual v12.3.0 User Manual

1212 Brocade Network Advisor SAN User Manual
53-1003154-01
Predefined flow definition templates
29
Configuring Frame Type Monitoring template
The Frame Type Monitoring template creates flow rows like Static Flow template with frame types
as shown in Figure 523.
FIGURE 523 Add Flow Definition - Frame Type Monitoring template dialog box
Perfom the following steps, in the Add Flow Definition - Frame Type Monitoring dialog box:
The default Device View is Port Address.
1. The Flow Name field is filled with the predefined flow name and the format is
<portname>_<last 4 digits of the source device WWN>_<last 4 digits of the destination device
WWN>.
2. Select Frame Type from the list.
3. Continue from step 2 through step 6 in “Configuring Static Flow template” on page 1209" to
deploy the flow definition.