User Manual v12.3.0 User Manual

1362 Brocade Network Advisor SAN User Manual
53-1003154-01
MAPS actions
33
FIGURE 577 View Policy dialog box
3. Select one of the category tabs to view the rules defined for the policy.
For a complete list of categories and the associated measures and actions, refer to “MAPS
categories, measures, and actions” on page 1335. Options include:
• Port tab — Rules defined on this tab measure thresholds on ports or SFPs to determine if
an out of range violation is sent for the port.
• Switch Status tab — Rules defined on this tab measure thresholds at the switch or chassis
level to determine the switch operational status.
• Fabric tab — Rules defined on this tab measure thresholds at the switch level to detect out
of range fabric-wide changes.
• FRU tab — Rules defined on this tab measure thresholds on fans, power supplies, SFPs,
blades, or WWN cards to detect out of range FRU changes.
• Security tab — Rules defined on this tab measure thresholds at the switch level to detect
out of range security changes.
• Resource tab — Rules defined on this tab measure thresholds on temperature sensors or
at the chassis level to detect out of range resource usage.
• FCIP tab — Rules defined on this tab measure thresholds on FCIP circuits to detect out of
range state, utilization, or packet loss.
• Traf fic / Flows tab — Rules defined on this tab measure thresholds on ports in the
configured group to detect out of range link utilization or on flows to detect out of range
flow changes.
• FPI tab — Rules defined on this tab measures thresholds on the performances of the fabric