User Manual v12.3.0 User Manual

Brocade Network Advisor SAN User Manual 301
53-1003154-01
Performance monitors
7
• Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 323.
Accessing additional data from the Top Port C3 Discards monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “SAN shortcut menus” on
page 1422.
• Double-click a row to navigate to the Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 1067.
Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor (Figure 128) displays the top ports with receive Class 3
frames received at this port and discarded at the transmission port due to timeout in a table.
FIGURE 128 Top Port C3 Discards RX TO monitor
The Top Port C3 Discards RX TO monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.