Reference v4.1.0 Instruction Manual

Network OS Command Reference 967
53-1003115-01
show qos maps
2
show qos maps
Displays information on the defined QoS maps.
Synopsis show qos maps [cos-mutation [name]| cos-traffic-class [name]]
Operands cos-mutation name
Specifies to report on only the named CoS-to-CoS mutation QoS map.
cos-traffic-class name
Specifies to report on only the named CoS-to-Traffic Class QoS map.
Defaults Report shows all defined QoS maps.
Command Modes Privileged EXEC mode
Description Use this command to display information on the QoS defined maps. For each QoS map, the
configuration state is displayed with a list of all interfaces bound to the QoS map.
Usage Guidelines None
Examples To display information on the defined QoS maps:
switch# show qos maps
CoS-to-CoS Mutation map 'test'
In-CoS:01234567
--------------------------------
Out-CoS:01235467
Enabled on the following interfaces:
Te 0/5
CoS-to-Traffic Class map 'test'
Out-CoS:01234567
-------------------------------------
TrafficClass:01235467
Enabled on the following interfaces:
Te 0/5
See Also qos map cos-traffic-class, show qos interface