Reference v4.1.0 Instruction Manual

Network OS Command Reference 969
53-1003115-01
show qos maps dscp-mutation
2
showqosmapsdscp-mutation
Displays configured DSCP-mutation maps.
Synopsis show qos maps dscp-mutation
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display configured QoS DSCP-mutation maps and application on interfaces.
Usage Guidelines This command is only supported on Brocade VDX 8770-4, VDX 8770-8, and later switches.
Examples To display information on defined QoS DSCP-mutation maps.
sw0# show qos maps dscp-mutation
Dscp-to-Dscp Mutation map 'test' (dscp= d1d2)
d1 :d2 0123456789
-------------------------------------
0 : 00 09 10 09 10 09 10 09 10 09
1 : 10 19 20 19 20 19 20 19 20 19
2 : 20 21 22 23 24 25 26 27 28 29
3 : 30 31 32 33 34 35 36 37 38 39
4 : 40 41 42 43 44 45 46 47 48 49
5 : 50 51 52 53 54 55 56 57 58 59
6 : 60 61 62 63
Enabled on the following interfaces:
Te 16/2/2
This information relates to the following map configuration applied to interface 16/2/2:
qos map dscp-mutation test
mark 1,3,5,7 to 9
mark 11,13,15,17 to 19
mark 12,14,16,18 to 20
mark 2,4,6,8 to 10
See Also qos map dscp-mutation