Reference v4.1.0 Instruction Manual

Network OS Command Reference 971
53-1003115-01
show qos queue interface
2
show qos queue interface
Displays the runtime state retrieved from the interface reflecting the number of packets and bytes
sent and received for each priority.
Synopsis show qos queue interface [tengigabitethernet rbridge-id/slot/port |
gigabitethernet rbridge-id/slot/port | all]
Operands tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
all Reports QoS statistics for all Ethernet interfaces within the system.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the runtime state retrieved from the interface reflecting the number
of packets and bytes sent and received for each priority.
Usage Guidelines For a standalone switch, all ASICs are considered as slot number zero (0).
The gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,
Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.
Examples To display the queueing information for a 10-gigabit Ethernet interface:
switch# show qos queue interface tengigabitethernet 5/0/2
Interface Ten Gigabit Ethernet 5/0/2
RX RX TX TX
CoS Packets Bytes TC Packets Bytes
------------------------------- -------------------------------
0 680458 87098624 0 0 0
1 0 0 1 32318 0
20 0 20 0
30 0 30 0
40 0 40 0
50 0 50 0
60 0 60 0
70 0 70 0
See Also qos map cos-mutation, cee-map (configuration)