Reference v4.1.0 Instruction Manual

Network OS Command Reference 985
53-1003115-01
show redundancy
2
show redundancy
Displays the control processor redundancy settings of the Management Module (MM).
Synopsis show redundancy
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the redundancy settings of the MM.
Usage Guidelines None
Examples To show redundancy:
switch# show redundancy
=== MM Redundancy Statistics ===
Current Active Session:
Active Slot = M2 (Local), Failover Cause: Failed Over
Standby Slot = M1 (Remote)
Start Time: 11:11:08 UTC Wed Nov 28 2012
Previous Active Session:
Active Slot = M1
Standby Slot = M2
End Time: 09:50:07 UTC Wed Nov 28 2012
System Uptime: 09:42:12 UTC Wed Nov 28 2012
See Also ha failover, ha enable, ha failover, show ha