Reference v4.1.0 Instruction Manual

986 Network OS Command Reference
53-1003115-01
show rmon
2
show rmon
Displays the current RMON status on the switch.
Synopsis show rmon [alarms [number] [brief]| events [number] [brief]| logs [event_number]|
statistics [number] [brief]]
Operands alarms Specifies to display the RMON alarm table.
number Specifies the alarm index identification number. Valid values range from 1
through 65535.
brief Specifies to display a brief summary of the output.
events Specifies to display the RMON events table.
number Specifies the event index identification number. Valid values range from 1
through 65535.
brief Specifies to display a brief summary of the output.
logs Specifies to display the RMON log table.
event_number Specifies the event log index identification number. Valid values range
from 1 through 65535.
statistics Specifies to display the statistics identification number.
number Specifies the statistics identification number. Valid values range from 1
through 65535.
brief Specifies a brief summary of the output.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the status of the current RMON on the switch.
Usage Guidelines None
Examples To display the RMON statistics:
switch# show rmon statistics
rmon collection index 4
Interface index is Id: 67108864 , Name : Ten Gigabit Ethernet 0/0
Receive Statistics:
218903 packets, 14015626 bytes, 0 packs dropped
Multicasts: 218884, Broadcasts: 18
Under-size : 0, Jabbers: 0, CRC: 0
Fragments: 0, Collisions: 0
64 byte pkts: 218722, 65-127 byte pkts: 174
128-255 byte pkts: 0, 256-511 byte pkts: 6
512-1023 byte pkts: 0, 1024-1518 byte pkts: 0
Over 1518-byte pkts(Oversize - Jumbo): 0
Owner: RMON_SNMP
Status: ok(1)