Reference v4.1.0 Instruction Manual

Network OS Command Reference 997

53-1003115-01

show running-config access-list

Displays currently configured ACLs in the running configuration.

Synopsis show running-config {ip | ipv6 | mac} access-list {standard | extended} [access-list [NAME]]

Operands access-list NAME Specifies a Level 2 or Level 3 ACL.

ip | ipv6 | mac Displays the configured rules of either a Layer 2 or Layer 3 ACL.

standard | extended Specifies the ACL type.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the rules of IP ACLs in the running configuration.

Usage Guidelines This command is supported only on the local switch.

Examples To display all IP ACLs in the running-config of the local switch:

switch# show running-config access-list ip

Interface Ten Gigabit Ethernet 2/1

Inbound access-list is IP_ACL_STD_EXAMPLE (From User)

Outbound access-list is IP_ACL_EXT_EXAMPLE (From User)

See Also mac access-list extended, mac access-list standard