Reference v4.1.0 Instruction Manual

1006 Network OS Command Reference

53-1003115-01

show running-config fabric route mcast

Displays fabric route multicast configuration information.

Synopsis show running-config fabric route mcast {rbridge-id rbridge-id | priority}

Operands rbridge-id rbridge-id Specifies the RBridge ID.

priority Displays the priority value.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display fabric route multicast configuration information.

Usage Guidelines The configuration currently effective on the switch is referred to as the running configuration. Any

configuration change you make while the switch is online is made to the running configuration.

Examples These examples display fabric route multicast configuration information:

switch# show running-config fabric route mcast

fabric route mcast rbridge-id 2

switch# show running-config fabric route mcast rbridge-id 2 priority

fabric route mcast rbridge-id 2

priority 1

See Also fabric route mcast, show fabric route multicast