Reference v4.1.0 Instruction Manual

Network OS Command Reference 1011
53-1003115-01
show running-config interface FibreChannel
2
show running-config interface FibreChannel
Displays Fibre Channel port attributes.
Synopsis show running-config interface FibreChannel [rbridge-id/slot/port [desire-distance | fill-word |
isl-r_rdy | long-distance | shutdown | speed | trunk-enable | vc-link-init]]
Operands rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
desire-distance Displays the setting of the desired distance attribute.
fill-word Displays the configured link initialization and fill word primitives for 8 Gbps
Fibre Channel ports: idle-idle, arbff-arbff, idle-arbff, or aa-then-ia.
isl-r_rdy Displays whether R_RDY buffer-to-buffer flow control is enabled for the ISL.
VC_RDY flow control is enabled if R_RDY flow control is disabled.
long-distance Displays the configured long distance mode:
l0—Long distance mode is not configured.
le—Link is up to 10 km.
ld—Distance is determined dynamically.
ls—Distance is determined statically by the user (desire-distance
command).
shutdown Displays whether the port is enabled (no shutdown) or disabled
(shutdown).
speed Displays the configured port speed: auto, 1 Gbps, 2 Gbps, 4 Gbps, or
8Gbps.
trunk-enable Displays whether trunking is enabled on the port.
vc-link-init Displays the configured long distance fill word: idle or arb.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display port attributes for a specified Fibre Channel port or for all
Fibre Channel ports on the cluster.
Enter the command without specifying rbridge-id/slot/port to obtain a listing of attributes for all
Fibre Channel ports. Enter the command with the rbridge-id/slot/port parameters to obtain
attributes information for a specific port. The values for desire-distance, isl-r_rdy, trunk-enable,
and shutdown are always displayed. The values for fill-word, long-distance, speed, and vc-link-init
are displayed only if they have been changed from their default values.
Include the attribute name to obtain the setting of that specific attribute only.
Usage Guidelines This command can be used only on Network OS platforms with Fibre Channel ports
(Brocade VDX 6730-32 and Brocade VDX 6730-76 switches), in Brocade VCS Fabric mode, and
with the FCoE license installed.