Reference v4.1.0 Instruction Manual

1016 Network OS Command Reference
53-1003115-01
show running-config interface fortygigabitethernet channel-group
2
show running-config interface
fortygigabitethernet channel-group
Displays channel group configuration information for a 40-gigabit Ethernet interface participating
in link aggregation.
Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] channel-group [mode |
type]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
mode Displays the mode of link aggregation (active, passive, or on).
type Displays the type of link aggregation (802.3ad standards-based LAG, or
Brocade proprietary hardware-based trunking).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the channel group configuration of the specified
Ethernet interface.
Usage Guidelines This command is relevant only to interfaces configured as part of a LAG.
Examples None
See Also channel-group