Reference v4.1.0 Instruction Manual

1020 Network OS Command Reference

53-1003115-01

show running-config interface fortygigabitethernet fabric

Displays fabric protocol configuration parameters for a 40-gigabit Ethernet interface.

Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] fabric [isl [enable]|

trunk [enable]]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

isl [enable] Indicates only the administration and operational state the Inter-Switch

Link (ISL).

trunk [enable] Indicates only whether trunking is enabled on the port.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display ISL and trunking status for the specified interface.

Usage Guidelines None

Examples

switch# show running-config interface fortygigabitethernet 1/0/49 fabric

interface fortygigabitethernet 1/0/49

fabric isl enable

fabric trunk enable

See Also fabric isl enable, fabric trunk enable