Reference v4.1.0 Instruction Manual

Network OS Command Reference 1027
53-1003115-01
show running-config interface fortygigabitethernet priority-tag
2
show running-config interface
fortygigabitethernet priority-tag
Displays whether 802.1p priority tagging is configured for a 40-gigabit Ethernet interface.
Synopsis show running-config interface fortygigabitethernet [rbridge-id/slot/port] priority-tag
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display whether 802.1p priority tagging is configured for the specified
interface.
Usage Guidelines None
Examples
switch# show running-config interface fortygigabitethernet 1/0/51 priority-tag
interface fortygigabitethernet 1/0/51
priority-tag
See Also priority-tag