Reference v4.1.0 Instruction Manual

Network OS Command Reference 1035
53-1003115-01
show running-config interface gigabitethernet
2
show running-config interface gigabitethernet
Displays the status of 1-gigabit Ethernet interfaces.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port]
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults Displays the configuration of all 1-gigabit Ethernet interfaces on the local switch.
Command Modes Privileged EXEC mode
Description Use this command to display the configuration of 1-gigabit Ethernet interfaces.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples To display configuration information about all 1-gigabit Ethernet interfaces on the local switch:
switch# show running-config interface gigabitethernet
interface Gigabit Ethernet 22/0/1
description tests
channel-group 2 mode active type standard
lacp timeout long
sflow enable
no shutdown
!
interface Gigabit Ethernet 22/0/2
channel-group 2 mode active type standard
lacp timeout long
no shutdown
!
interface Gigabit Ethernet 22/0/3
channel-group 2 mode active type standard
lacp timeout long
no shutdown
!
interface Gigabit Ethernet 22/0/4
no shutdown
!
interface Gigabit Ethernet 22/0/5
no shutdown
!
interface Gigabit Ethernet 22/0/6
no shutdown
!
interface Gigabit Ethernet 22/0/7
no shutdown
(output truncated)
See Also interface