Reference v4.1.0 Instruction Manual

Network OS Command Reference 1037

53-1003115-01

show running-config interface gigabitethernet channel-group

show running-config interface

gigabitethernet channel-group

Displays channel group configuration information for an interface participating in link aggregation.

Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] channel-group [mode | type]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

mode Displays the mode of link aggregation (active, passive, or on).

type Displays the type of link aggregation (802.3ad standards-based LAG, or

Brocade proprietary hardware-based trunking).

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information about the channel group configuration of the specified

Ethernet interface.

Usage Guidelines This command is relevant only to interfaces configured as part of a LAG.

This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and

Brocade VDX 8770-8 switches.

Examples None