Reference v4.1.0 Instruction Manual

Network OS Command Reference 1045
53-1003115-01
show running-config interface gigabitethernet port-profile-port
2
show running-config interface
gigabitethernet port-profile-port
Displays whether AMPP port-profile configuration mode is enabled for a 1-gigabit Ethernet
interface.
Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] port-profile-port
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display whether AMPP port-profiling is configured for the specified interface.
Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and
Brocade VDX 8770-8 switches.
Examples
switch# show running-config interface gigabitethernet 1/0/8 port-profile-port
interface Gigabit Ethernet 1/0/8
port-profile-port
See Also port-profile-port