Reference v4.1.0 Instruction Manual

1046 Network OS Command Reference

53-1003115-01

show running-config interface gigabitethernet priority-tag

Displays whether 802.1p priority tagging is configured for a 1-gigabit Ethernet interface.

Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] priority-tag

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Description Use this command to display whether AMPP port-profiling is configured for the specified interface.

Command Modes Privileged EXEC mode

Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and

Brocade VDX 8770-8 switches.

Examples

switch# show running-config interface gigabitethernet 1/0/8 priority-tag

interface Gigabit Ethernet 1/0/8

priority-tag