Reference v4.1.0 Instruction Manual

Network OS Command Reference 1047

53-1003115-01

show running-config interface gigabitethernet qos

Displays the Quality of Service (QoS) configuration for a 1-gigabit Ethernet interface.

Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] qos [cos | cos-mutation |

cos-traffic-class | flowcontrol [rx | tx]| trust [cos]]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

cos Displays only the Class of Service (CoS) value configured for the interface.

cos-mutation Displays the Cos-to-CoS mutation QoS map configured for the interface.

cos-traffic-class Displays the CoS-to-Traffic Class QoS Map configured for the interface.

flowcontrol Displays the activation status of QoS flow control on the interface.

rx Displays the activation status of the receive portion of flow control for the

interface.

tx Displays the activation status of the transmit portion of flow control for the

interface.

trust cos Displays the configured QoS trust mode for the interface.

Defaults Displays the full QoS configuration for the interface.

Command Modes Privileged EXEC mode

Description Use this command to display the QoS configuration for the specified interface.

Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and

Brocade VDX 8770-8 switches.

Examples None

See Also qos cos, qos cos-mutation, qos cos-traffic-class, qos flowcontrol tx, qos trust cos,

show qos flowcontrol interface, show qos interface, show qos queue interface,

show qos rcv-queue interface