Reference v4.1.0 Instruction Manual

Network OS Command Reference 1051

53-1003115-01

show running-config interface gigabitethernet switchport

Displays the configured switching characteristics for the 1-gigabit Ethernet Layer 2 interface.

Synopsis show running-config interface gigabitethernet [rbridge-id/slot/port] switchport [access [vlan]|

mode | trunk [allowed [vlan]|native-vlan | tag [native-vlan]]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

access Displays whether the Layer 2 interface is configured as access.

access vlan Displays whether the specific VLAN on the Layer 2 interface is configured

as access.

mode Displays whether the Layer 2 interface is configured for access, trunk or

converged.

trunk Displays whether the Layer 2 interface is configured for trunk.

trunk allowed Displays the configuration settings that determine the VLANs that will

transmit and receive through the Layer 2 interface.

trunk allowed vlan Displays the configuration settings for a specific VLAN.

trunk allowed native-vlan

Displays the configured native VLAN characteristics of the Layer 2 trunk

interface for classifying untagged traffic.

trunk tag Displays whether tagging is enabled.

tag native-vlan Displays tags for the native VLAN.

Defaults Displays all configured Layer 2 switching characteristics for the port.

Command Modes Privileged EXEC mode

Description Use this command to display configured switching characteristics for the port.

Usage Guidelines This command can be used only on Brocade VDX 6710, Brocade VDX 8770-4, and

Brocade VDX 8770-8 switches.

Examples

switch# show running-config interface gigabitethernet 1/0/8 switchport

interface Gigabit Ethernet 1/0/8

switchport

switchport mode access

switchport access vlan 1

See Also switchport, switchport access, switchport mode, switchport trunk allowed vlan rspan-vlan