Reference v4.1.0 Instruction Manual

1058 Network OS Command Reference

53-1003115-01

show running-config interface tengigabitethernet cee

Displays whether the default CEE map has been applied to a 10-gigabit Ethernet interface.

Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] cee

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to determine whether the default CEE map has been applied to a 10-gigabit

Ethernet interface.

Usage Guidelines This command does not apply to ISL ports.

Examples None