Reference v4.1.0 Instruction Manual

Network OS Command Reference 1063

53-1003115-01

show running-config interface tengigabitethernet fabric

Displays fabric protocol configuration parameters for a 10-gigabit Ethernet interface.

Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] fabric [isl [enable]|

trunk [enable]]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

isl [enable] Indicates only the administration and operational state of the Inter-Switch

Link (ISL).

trunk [enable] Indicates only whether trunking is enabled on the port.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display ISL and trunking status for the specified 10-gigabit Ethernet

interface.

Usage Guidelines None

Examples

switch# show running-config interface tengigabitethernet 1/0/49 fabric

interface tengigabitethernet 1/0/49

fabric isl enable

fabric trunk enable

See Also fabric isl enable, fabric trunk enable