Reference v4.1.0 Instruction Manual

1066 Network OS Command Reference

53-1003115-01

show running-config interface tengigabitethernet lldp

Displays Link Layer Discovery Protocol (LLDP) configuration information for a 10-gigabit Ethernet

interface.

Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] lldp [dcbx-version |

disable | iscsi-priority | profile]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

dcbx-version Displays the configured version of the Data Center Bridging Exchange

(DCBX) protocol.

disable Indicates whether LLDP is disabled on the interface.

iscsi-priority Displays the configured priority that will be advertized in the DCBX iSCSI

TLV.

profile Displays the LLDP profile configured on the interface.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display Link Layer Discovery Protocol (LLDP) configuration information for

the specified10-gigabit Ethernet interface.

Usage Guidelines None

Examples None

See Also lldp dcbx-version, lldp disable, lldp iscsi-priority, lldp profile