Manualshelf

Reference v4.1.0 Instruction Manual

ManualsBrandsBrocade ManualsComputer AccessoriesNetwork OS Command
1101110211031104110511061107110811091110
Network OS Command Reference 1069
53-1003115-01
show running-config interface tengigabitethernet port-profile-port
2
show running-config interface
tengigabitethernet port-profile-port
Displays whether AMPP port-profile configuration mode is enabled for a 10-gigabit Ethernet
interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] port-profile-port
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display whether AMPP port-profiling is configured for the specified 10-gigabit
Ethernet interface.
Usage Guidelines None
Examples
switch# show running-config interface tengigabitethernet 1/0/50 port-profile-port
interface tengigabitethernet 1/0/50
port-profile-port
See Also port-profile-port