Reference v4.1.0 Instruction Manual

1070 Network OS Command Reference
53-1003115-01
show running-config interface tengigabitethernet priority-tag
2
show running-config interface
tengigabitethernet priority-tag
Displays whether 802.1p priority tagging is configured for a 10-gigabit Ethernet interface.
Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port] priority-tag
Operands rbridge-id Specifies a switch by its RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display whether 802.1p priority tagging is configured for the specified
10-gigabit Ethernet interface.
Usage Guidelines None
Examples
switch# show running-config interface tengigabitethernet 1/0/51 priority-tag
interface tengigabitethernet 1/0/51
priority-tag
See Also priority-tag