Reference v4.1.0 Instruction Manual

Network OS Command Reference 1077

53-1003115-01

show running-config interface tengigabitethernet vlan

Displays information about VLAN classification groups for a 10-gigabit Ethernet Layer 2 interface.

Synopsis show running-config interface tengigabitethernet [rbridge-id/slot/port]

vlan [classifier [activate [group]]]

Operands rbridge-id Specifies a switch by its RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

classifier Displays VLAN classifier commands for the Layer 2 interface.

activate Displays VLAN classifier activate commands for the Layer 2 interface.

group Displays VLAN classifier activate group commands for the Layer 2 interface.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display VLAN classifier commands executed for the specified port.

Usage Guidelines None

Examples

switch# show running-config interface tengigabitethernet 1/0/49 vlan

interface tengigabitethernet 1/0/49

vlan classifier activate group 1 vlan 2

See Also show vlan classifier, switchport, vlan classifier activate group, vlan classifier group,

vlan classifier rule