Reference v4.1.0 Instruction Manual

1078 Network OS Command Reference

53-1003115-01

show running-config interface vlan

Displays the status of VLAN interfaces.

Synopsis show running-config interface vlan [vlan_id] [arp-ageing-timeout | description | ip | mac

access-group | shutdown | spanning-tree]

Operands vlan_id Specifies a VLAN. Refer to the Usage Guidelines.

arp-ageing-timeout Displays the configured interface timeout value in minutes for the Address

Resolution Protocol (ARP) for VLANs.

description Displays the description text entered for each VLAN or for the specified

VLAN.

ip Displays IP configuration information for VLANs.

mac access-group Displays MAC ACLs configured for VLANs.

shutdown Specifies whether the VLAN interface is enabled.

spanning-tree Displays spanning tree configuration information for VLANs.

Defaults Displays the configuration of all VLAN interfaces on the local switch.

Command Modes Privileged EXEC mode

Description Use this command to display the configuration of VLAN interfaces.

Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point

of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs

are as follows:

• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

Examples None

See Also interface, show running-config interface vlan ip