Reference v4.1.0 Instruction Manual

Network OS Command Reference 1081
53-1003115-01
show running-config ip access-list
2
show running-config ip access-list
Displays the configuration for the IP ACL and its configured rules.
Synopsis show running-config ip access-list [ip | ipv6]
Operands ip | ipv6 Specifies the IP type. An ACL can contain rules for only one version of IP
(either IPv4 or IPv6).
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the ACL parameters.
Usage Guidelines None
Examples The following example shows the display of a configured ACL with rules.
switch# show running-config ip access-list
ip access-list standard stdACL3
seq 5 permit host 10.20.33.4
seq 7 permit any
ip access-list extended extdACL5
seq 5 deny tcp host 10.24.26.145 any eq 23
seq 7 deny tcp any any eq 80
seq 10 deny udp any any range 10 25
seq 15 permit tcp any
ip access-list extended extdACLwithNoRules
See Also show running-config interface management, interface management, ip access-list