Reference v4.1.0 Instruction Manual

Network OS Command Reference 1085

53-1003115-01

show running-config ldap-server

Displays the SSH server status in the running-config.

Synopsis show running-config ldap-server [host ipaddr | host-name]

Operands host Identifies the IPv4 address of the host.

ipaddress IPv4 address of the host.

host-name Name of the host.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the current status of the LDAP server in the running-config.

Usage Guidelines LDAP server configuration is placed at the beginning of the running-config and is part of the global

configuration of the switch. LDAP is enabled by default and no entry is shown in the running-config

when set to default.

Attributes with default values will not be displayed.

Examples Standalone mode

switch# show running-config ldap-server host 10.24.65.6

ldap-server host 10.24.65.6

port 3890

domain security.brocade.com

retries 3

switch#

See Also certutil import ldapca, ldap-server host, ldap-server maprole