Reference v4.1.0 Instruction Manual

Network OS Command Reference 1089
53-1003115-01
show running-config logging raslog
2
show running-config logging raslog
Displays the severity level configured for the RASLog console.
Synopsis show running-config logging raslog
Operands None
Defaults Displays the RASLog console configuration.
Command Modes Privileged EXEC mode
Description Use this command to display the configured severity levels for the RASlog console. Valid values
consist of one of the following: INFO, WARNING, ERROR, or CRITICAL.
Usage Guidelines This command is supported only on the local switch.
This command is not supported on the standby management module.
Examples To display the severity level configured for the RASlog console:
switch# show running-config logging raslog
logging raslog console INFO
See Also clear logging raslog, logging raslog console, show running-config logging