Reference v4.1.0 Instruction Manual

Network OS Command Reference 1101
53-1003115-01
show running-config port-profile qos-profile
2
show running-config port-profile qos-profile
Displays the configured Quality of Service (QoS) subprofile.
Synopsis show running-config port-profile [name] qos-profile [cee [name]| qos [cos cos|
cos-mutation name| cos-traffic-class name | flowcontrol [pfc | rx | tx]| trust [cos]]
Operands name Specifies the name of a port-profile. If no name is provided, information
about all port-profiles with the QoS subprofile applied is displayed.
cee [name] The configured QoS CEE map.
qos The QoS profile.
cos cos The configured default class of service (CoS).
cos-mutation name
The applied Cos-to-Cos mutation map.
cos-traffic-class name
The applied Cos-to-Traffic class map.
flowcontrol The configured IEEE 802.3x flow control.
pfc Whether priority-based flow control (PFC) is enabled.
rx Whether Pause reception is enabled.
tx Whether Pause generation is enabled.
trust The configured QoS trust configuration.
cos Whether the Layer 2 CoS field in incoming packets is configured as trusted
for deriving the internal traffic class.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display QoS subprofiles.
Usage Guidelines None
Examples None
See Also port-profile (global configuration mode), qos cos, qos cos-mutation, qos map cos-traffic-class,
qos flowcontrol tx, qos flowcontrol pfc, qos-profile (AMPP), show running-config port-profile,