Reference v4.1.0 Instruction Manual

Network OS Command Reference 1125

53-1003115-01

show running-config secpolicy

Displays the Switch Connection Control (SCC) security policy information.

Synopsis show running-config [rbridge-id {rbridge-id | all}] secpolicy {defined-policy | active-policy}

Operands defined-policy Displays the defined policy and its policy member set.

active-policy Displays the active policy and its policy member set.

rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

all Specifies all identifiers for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the active policy and the defined policy and its policy member set.

Usage Guidelines The rbridge-id operand is supported in VCS mode only.

Examples Standalone mode

To show only the defined policy:

switch# show running-config secpolicy defined-policy

secpolicy defined-policy SCC_POLICY

member-entry 11:11:11:11:11:11:11:11

member-entry 22:22:22:22:22:22:22:22

member-entry 33:33:33:33:33:33:33:33

To show only the active policy:

switch# show running-config secpolicy active-policy

secpolicy active-policy SCC_POLICY

member-entry 11:11:11:11:11:11:11:11

member-entry 22:22:22:22:22:22:22:22

member-entry 33:33:33:33:33:33:33:33

To show both active and defined policies:

switch# show running-config secpolicy

secpolicy defined-policy SCC_POLICY

member-entry 11:11:11:11:11:11:11:11

member-entry 22:22:22:22:22:22:22:22

member-entry 33:33:33:33:33:33:33:33

secpolicy active-policy SCC_POLICY

member-entry 11:11:11:11:11:11:11:11