Reference v4.1.0 Instruction Manual

1142 Network OS Command Reference

53-1003115-01

show running-config telnet server

Displays the Telnet server status in the running-config.

Synopsis show running-config [rbridge-id {rbridge-id | all}] telnet server

Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

all Specifies all identifiers for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the current status of Telnet server in the running-config.

Usage Guidelines Telnet server configuration is placed at the beginning of running-config and is part of the global

configuration of the switch. Telnet is enabled by default and there will be no entry in the

running-config when set to default.

Examples Standalone mode

When Telnet service is shut down:

switch# show running-config telnet server

telnet server shutdown

VCS mode

When Telnet service is shut down:

switch# show running-config rbridge-id 3 telnet server

rbridge-id 3

telnet server shutdown

When Telnet service is enabled:

switch# show running-config [rbridge-id rbridge-id | all] telnet server

% No entries found

See Also telnet server shutdown, show telnet server status, telnet