Reference v4.1.0 Instruction Manual

1154 Network OS Command Reference

53-1003115-01

show running-config nas server-ip

Displays information about the specified Auto NAS (automatic network attached storage) interface.

Synopsis show running-config nas server-ip {gigabitethernet rbridge-id/slot/port |

tengigabitethernet rbridge-id/slot/port | fortygigabitethernet rbridge-id/slot/port}}

Operands gigabitethernet Selects a 1-GbE interface.

tengigabitethernet Selects a 10-GbE interface.

fortygigabitethernet Selects a 40-GbE interface.

rbridge-id/slot/port

Selects the RBridge ID, slot, and port of the respective interface.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information about the specified Auto NAS interface.

Usage Guidelines This command is supported only on Brocade VDX 8770-4, VDX 8770-8, VDX 6740, and VDX 6740T

switches.

Examples To display information about the 10 GbE Auto NAS interface 4/1/5:

switch0# show running-config nas server-ip tengigabitethernet 4/1/5

NAS Traffic

matches 2000000 packets 40000000 bytes

See Also auto-qos enable, clear nas statistics, nas auto-qos, nasport server-ip, show nas statistics,

show system internal nas, show cee maps