Reference v4.1.0 Instruction Manual

Network OS Command Reference 1159
53-1003115-01
show sfm
2
show sfm
Displays information about the switch fabric modules present in the chassis.
Synopsis show sfm
Operands None
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about the switch fabric modules present in a modular
switch. The output includes the following information:
Slot Displays the slot number. Slots for switch fabric modules are S1 through S3
for Brocade VDX 8770-4 switches and S1 through S6 for Brocade
VDX 8770-8 switches.
Type Displays the interface module type. The switch fabric module type is SFM.
Description Module description
ID Displays the module ID. The ID for the switch fabric module is 113.
Status Displays the status of the module as one of the following:
VACANT The slot is empty.
POWERED-OF The module is present in the slot but is powered off.
POWERING UP The module is present and powering on.
LOADING The module is present, powered on, and loading the initial configuration.
DIAG RUNNING POST1
The module is present, powered on, and running the POST (power-on
self-test).
DIAG RUNNING POST2
The module is present, powered on, and running the reboot power on self
tests.
INITIALIZING The module is present, powered on, and initializing hardware components.
ENABLED The module is on and fully enabled.
DISABLED The module is powered on but disabled.
FAULTY The module is faulty because an error was detected.
UNKNOWN The module is inserted but its state cannot be determined.
Usage Guidelines None
Examples To display the switch fabric modules present in a Brocade VDX 8770-4 chassis:
switch# show sfm
Slot Type Description ID Status
----------------------------------------------------------------------
S1 SFM Switch Fabric Module 113 ENABLED#