Reference v4.1.0 Instruction Manual

Network OS Command Reference 1163

53-1003115-01

show slots

DISABLED The module is powered on but disabled.

FAULTY The module is faulty because an error was detected.

UNKNOWN The module is inserted but its state cannot be determined.

Usage Guidelines None

Examples To display the modules present in a Brocade VDX 8770-4 chassis:

switch# show slots

Slot Type Description ID Status

----------------------------------------------------------------------

M1 MM Management Module 112 ENABLED

M2 VACANT

S1 VACANT#

S2 SFM Switch Fabric Module 113 ENABLED#

S3 VACANT

L1 LC48X10G 48-port 10GE card 114 ENABLED

L2 LC48X10G 48-port 10GE card 114 ENABLED

L3 VACANT

L4 LC48X1G 48-port 1GE card 131 ENABLED

# = At least one enabled SFM in these slots is required.

NOTE

An “@” following an SFM status line indicates that the status of the optical switch is “OPEN.”