Reference v4.1.0 Instruction Manual

1184 Network OS Command Reference

53-1003115-01

show statistics access-list interface

Displays the statistical information on any ACL of the type specified bound on the specified

interface.

Synopsis show statistics access-list interface {port-channel index | gigabitethernet slot/port |

tengigabitethernet slot/port | fortygigabitethernet slot/port | vlan vlan_id | ve vlan_id} {in | out}

Operands port-channel index Specifies the port-channel index to which the ACL is bound.

gigabitethernet slot/port

Specifies the 1-gigabit Ethernet interface to which the ACL is bound.

tengigabitethernet slot/port

Specifies the 10-gigabit Ethernet interface to which the ACL is bound.

fortygigabitethernet slot/port

Specifies the 40-gigabit Ethernet interface to which the ACL is bound.

vlan vlan_id Specifies the VLAN interface to which the ACL is bound. Refer to the Usage

Guidelines.

ve vlan_id Specifies the virtual Ethernet interface to which the ACL is bound. Refer to

the Usage Guidelines.

in | out Specifies the ACL binding direction (ingress or egress).

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the statistical information on any ACL of the type specified bound on

the specified interface.

Usage Guidelines On the Brocade VDX family of switches, VLANs are treated as interfaces from a configuration point

of view. By default, all the DCB ports are assigned to VLAN 1 (VLAN ID equals 1). Valid VLAN IDs

are as follows:

• On Brocade VDX 8770 switches: 1 through 4086 for 802.1Q VLANs (VLAN IDs 4087

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

• On all other Brocade VDX switches: 1 through 3962 for 802.1Q VLANs (VLAN IDs 3963

through 4095 are reserved on these switches), and 4096 through 8191 for service or

transport VFs in a Virtual Fabrics context.

Examples None