Reference v4.1.0 Instruction Manual

1190 Network OS Command Reference

53-1003115-01

show system monitor

Displays the overall status for a selected switch.

Synopsis show system monitor {rbridge-id [rbridge-id | all]}

Operands rbridge-id rbridge-id Specifies a switch using the switch’s RBridge ID.

all Reports all RBridge information.

Defaults None

Command Modes RBridge ID configuration mode

Description Use this command to display the overall switch status and the status of the contributors defined

as part of the policy.

Usage Guidelines This command is supported only on the local switch.

Examples

switch# show system monitor

** System Monitor Switch Health Report **

RBridge 128 switch status : HEALTHY

Time of Report : 2012-06-19 03:18:28

Power supplies monitor : HEALTHY

Temperatures monitor : HEALTHY

Fans monitor : HEALTHY

CID-Card monitor : HEALTHY

MM monitor : HEALTHY

LC monitor : HEALTHY

SFM monitor : HEALTHY

Flash monitor : HEALTHY

See Also show system monitor, system-monitor-mail, system-monitor