Reference v4.1.0 Instruction Manual

Network OS Command Reference 1191

53-1003115-01

show telnet server status

Displays the current Telnet server status.

Synopsis show telnet server status [rbridge-id {rbridge-id | all}]

Operands rbridge-id Enables RBridge ID mode to support Virtual Cluster Switching (VCS) on

individual nodes.

rbridge-id Specifies a unique identifier for a node.

all Specifies all identifiers for a node.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the current status of Telnet server.

Usage Guidelines None

Examples When Telnet server status is enabled:

switch# show telnet server status

Telnet server status: Enabled

When Telnet server status is disabled:

sw0# show telnet server status

Telnet server status: Disabled

If you are in VCS mode

When Telnet server status is enabled:

switch# show telnet server status [rbridge-id rbridge-id | all]

Telnet server status: Enabled

When Telnet server is disabled in rbridge-id 3:

switch# show telnet server status rbridge-id 3

rbridge-id 3 Telnet server status: Disabled

switch#

See Also telnet server shutdown, show running-config telnet server