Reference v4.1.0 Instruction Manual

1192 Network OS Command Reference

53-1003115-01

show threshold monitor

Displays the current status of environmental thresholds and alerts for interfaces, security, and

SFPs.

Synopsis show threshold monitor [interface all area | security area [login-violation [rbridge-id rbridge-id |

all] | telnet-violation [rbridge-id rbridge-id | all]] | sfp all area

[current |rxp |temperature |txp |voltage]

Operands interface all area Displays status of interface thresholds and alerts.

security area Displays status of security thresholds and alerts.

telnet-violation Displays status of Telnet violations.

sfp all area Displays status of SFP thresholds and alerts.

current Amount of current supplied to the SFP transceiver.

rxp Amount of incoming laser power, in microWatts (μW).

temperature Temperature of the SFP, in degrees Celsius.

txp Amount of outgoing laser power, in microWatts (μW).

voltage Amount of voltage supplied to the SFP.

rbridge-id rbridge-id Specifies a switch by means of the switch’s RBridge ID.

all Reports status for all nodes in the cluster.

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display the current status of environmental thresholds and alerts for

interfaces, security, and SFPs.

Usage Guidelines None

Examples

switch# show threshold monitor security area login-violation rbridge-id all

Rbridge-Id Area Value Status Monitoring Status

154 Login Violation 0 In Range Monitoring

See Also show defaults threshold, system-monitor, system-monitor-mail, threshold-monitor