Reference v4.1.0 Instruction Manual

1196 Network OS Command Reference

53-1003115-01

show udld statistics

Shows UDLD statistics.

Synopsis show udld statistics [interface {fortygigabitethernet rbridge-id/slot/port | gigabitethernet

rbridge-id/slot/port | tengigabitethernet rbridge-id/slot/port}]

Operands fortygigabitethernet rbridge-id/slot/port

Specifies a valid 40-gigabit Ethernet interface for showing statistics.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

gigabitethernet rbridge-id/slot/port

Specifies a valid 1-gigabit Ethernet interface for showing statistics.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface for showing statistics.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

Defaults None

Command Modes Privileged EXEC mode

Description Shows either all unidirectional link detection (UDLD) protocol statistics or shows the statistics on a

specified port.

Usage Guidelines None

Examples To show UDLD statistics on a specific 10-gigabitEthernet interface:

switch# show udld statistics interface te 5/0/1