Reference v4.1.0 Instruction Manual

1198 Network OS Command Reference
53-1003115-01
show vcs
2
show vcs
Displays the Brocade VCS Fabric configuration.
Synopsis show vcs {detail | virtual-ip}
Operands detail Displays detailed information about each RBridge in the fabric.
virtual-ip Displays the virtual IP address.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display the Brocade VCS Fabric parameters (VCS ID and the switch
RBridge ID) and Brocade VCS Fabric mode.
Usage Guidelines The VCS ID and switch RBridge ID are displayed only in VCS-enabled mode.
The show vcs command returns the state as “disabled” if the switch is in standalone mode. The
show fabric all command cannot be issued in standalone mode.
Examples
Example 1
To display the VCS summary view for a switch that is in fabric cluster mode ("Local-Only"):
switch# show vcs
Config Mode : Local-Only
VCS ID : 1
Total Number of Nodes : 1
Rbridge-Id WWN Management IP VCS Status Fabric Status HostName
1 10:00:00:05:33:51:63:42* 10.17.37.154 Online Online sw0
To display the VCS configuration details:
switch# show vcs detail
Config Mode : Local-Only
VCS ID : 1
Total Number of Nodes : 6
Node :1
Serial Number : BKN2501G00R
Condition : Good
Status : Connected to Cluster
VCS Id : 1
Rbridge-Id : 38
Co-ordinator : NO
WWN : 10:00:00:05:33:52:2A:82
Switch MAC : 00:05:33:52:2A:82
FCF MAC : 0B:20:B0:64:10:27
Switch Type : BR-VDX6720-24-C-24
Internal IP : 127.1.0.38
Management IP : 10.17.10.38
Node :2
Serial Number : BZA0330G00P
Condition : Good
Status : Connected to Cluster
VCS Id : 1
Rbridge-Id : 80*