Reference v4.1.0 Instruction Manual

Network OS Command Reference 1207

53-1003115-01

show vlan classifier

Displays information about a specific VLAN classifier group.

Synopsis show vlan classifier [group number | interface group-number | interface port-channel number |

rule number | interface tengigabitethernet rbridge-id/slot/port |

interface gigabitethernet rbridge-id/slot/port]

Operands group number Specifies the VLAN classifier group number. Valid values range from 1

through 16.

interface group number

Specifies the VLAN classifier interface group number. Valid values range

from 1 through 16.

interface port-channel number

Specifies the VLAN classifier port-channel number. Valid values range

from 1 through 63.

rule number Specifies the VLAN classifier rule number. Valid values range from 1

through 256.

interface tengigabitethernet

Specifies a valid 10-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number.

interface gigabitethernet

Specifies a valid 1-gigabit Ethernet interface.

rbridge-id Specifies the RBridge ID.

slot Specifies a valid slot number.

port Specifies a valid port number

Defaults None

Command Modes Privileged EXEC mode

Description Use this command to display information about all configured VLAN classifier groups or a specific

VLAN interface group.

Usage Guidelines If a group ID is not specified, all configured VLAN classifier groups are shown. If a group ID is

specified, a specific configured VLAN classifier group is shown.

The interface gigabitethernet rbridge-id/slot/port parameter is used only on Brocade VDX 6710,

Brocade VDX 8770-4, and Brocade VDX 8770-8 switches.

Examples None