Reference v4.1.0 Instruction Manual

1214 Network OS Command Reference
53-1003115-01
show vrrp
2
show vrrp
Displays information about VRRP and VRRP-E sessions.
Synopsis show vrrp VRID [detail] [summary]
show vrrp detail
show vrrp interface [detail] [summary]
show vrrp summary
Operands VRID The virtual-group ID about which to display information. Valid values range
from 1 to 128.
detail Displays all session information in detail, including session statistics.
summary Displays single line, session-information summaries.
interface Displays information for an interface that you specify.
fortygigabitethernet rbridge-id/slot/port
Specifies a valid 40-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID. This parameter is not valid in standalone mode.
slot Specifies a valid slot number.
port Specifies a valid port number.
gigabitethernet rbridge-id/slot/port
Specifies a valid 1-gigabit Ethernet interface
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
tengigabitethernet rbridge-id/slot/port
Specifies a valid 10-gigabit Ethernet interface.
rbridge-id Specifies the RBridge ID.
slot Specifies a valid slot number.
port Specifies a valid port number.
Defaults None
Command Modes Privileged EXEC mode
Description Use this command to display information about VRRP and VRRP-E sessions, either in summary or
full-detail format. Can also specify a particular virtual group or interface for which to display
output.
Usage Guidelines This command is for VRRP and VRRP-E. VRRP-E supports only the ve interface type. You can
modify or redirect the displayed information by using the default Linux tokens (|, >).
Examples To show all session information in detail, including session statistics:
switch# show vrrp detail
VRID 1